User manual

1.
Press .
ð
The [GROUP] display blinks.
2. Use the arrow keys to select the frequency group.
3.
Press to conrm the selection.
ð
The selected setting is accepted. The [CHANNEL] display blinks.
4. Use the arrow keys to select a channel within the set frequency group.
5.
Press to conrm the selection.
ð
The selected setting is accepted. The [PO.x] display blinks.
6. Use the arrow buttons to select the level for the radio signal in a range from 5 mW (PO.1)
to 30 mW (PO.4) (this option is omitted for the t.bone freeU HT 863 and the t.bone freeU
PT 863) .
Press to conrm the selection.
ð
The settings are complete.
Selecting frequency group and
channel
Operating
freeU HT, freeU PT
37