User manual

NOTICE!

External power supply

The device is powered by an external power supply. Before connecting the

external power supply, ensure that the input voltage (AC outlet) matches the

voltage rating of the device and that the AC outlet is protected by a residual cur‐

rent circuit breaker. Failure to do so could result in damage to the device and pos‐

sibly the user.

Unplug the external power supply before electrical storms occur and when the

device is unused for long periods of time to reduce the risk of electric shock or

re.

First, connect the power adapter to the receiver and then plug the power adapter into the

power outlet.

Attach the included antennas to the rear panel of the transmitter. To improve the transmission

quality and to adapt to the spatial conditions they are rotatable and swivelling.

In case the space provided on the device for direct assembly of the antennas is not sucient,

for example because the space on the rack is narrow, you can use the optionally available

coaxial cable to assemble the antennas separately from the device.

Connect the power supply

Attaching the antennas

Installation and starting up

UHF wireless system