User manual

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC
outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the
user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric
shock or re.
NOTICE!
Magnetic elds
The device generates strong magnetic elds that can interfere with the function of poorly shielded devices. The strongest magnetic
elds are directly above and below the power amplier. Therefore, never place sensitive devices such as pre-ampliers, radio trans‐
mission systems, or tape decks directly above or below the power amplier. When installing the power amplier into a rack, you
should place it in the lowest position, and further equipment such as pre-ampliers in the highest position.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time
cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐
sary, i.e. felt pads or similar.
Safety instructions
TSA 1400, TSA 2200, TSA 4000
11
Power amplier