User manual

Slew rate (1 kHz)
38 V/ms
IMD-SMPTE (60 Hz, 7 kHz)
< 0.1 %
DIM 30 (3.15 kHz, 15 kHz)
< 0.1 %
Crosstalk (ref. 1 kHz, 10 % rated power)
> 70 dB
Frequency response (at 1 kHz) 20 Hz … 20 kHz (0 – 2 dB)
Signal-to-noise ratio 105 dB (A-weighted)
Total harmonic distortion (THD)
< 0.1 %
Damping factor (100 Hz / 1 kHz, 8 Ω)
> 400
Sensitivity 1 V
Gain 38.4 dB
Power consumption Typical current consumption depending on the output power level (A
RMS
). All values
based on a 230 V mains voltage and a 1 kHz input signal at 0 dB (sine).
Load 1/8 nominal power 1/3 nominal power
(4 ×) 8 Ω 400 W / 3,0 A 860 W / 5,5 A
Technical specications
power amplier
30