User manual

8 POWER: Power indicator light
Lights up green when the device is turned on. In standby mode, the LED lights red.
As soon as the unit receives a signal, it switches back to normal mode and the LED
will light up green again.
9 POWER: On / o switch (9)
Use this mains switch to turn the device on or o. When switching on, the protec‐
tion circuits are activated. After a few seconds you will hear two ‘clicks’ - now the
speakers are electrically connected to the amplier and the device is ready to
operate.
When switching on electronic devices, especially power amps, the power con‐
sumption is particularly high. Make sure not to turn on too many devices simulta‐
neously. Otherwise, the power supply circuit may be overloaded and the RCD will
disconnect the power supply.
Connections and operating elements
S-75 MK II, S-100 MK II, S-150 MK II
17