User manual
Table Of Contents
1 [POWER]
Mains switch. Turns the device on and o.
2 [CHANNEL A ]/ [CHANNEL B]
Volume control for the respective channel
3 LED panel
[CLIP] Lights under the following conditions:
n Channel overload. The built-in limiter ist activated.
Reduce in this case the volume until the LED goes out and the built-in limiter is deactivated.
n Output short circuit.
Turn o the device immediately, correct the short circuit and turn on the device again.
[SGL] Indicates the presence of an input signal.
[PRO] Lights under the following conditions:
n Three to ve seconds after switching on or o when the device is in an unstable condition.
n The temperature of the amplier blocks has reached 85°C.
n One or more protection circuits have been triggered, or the device is faulty.
Connections and controls
power amplier
18