User manual

Table Of Contents

Depending on the individual application, the amplier can be used in dierent operation

modes:

Stereo mode

Both power amp channels operate independently of each other, each input (A

and B) is amplied by one channel, speakers are connected to both channels,

the volume for both outputs can be controlled separately.

Parallel mode

The two amplier channels receive the same input signal from channel A and

loudspeakers are connected to each amplier. The volume is controlled via the

control knob for channel A.

Bridged mode

Both power amp channels are internally wired for providing double the output

power. Only the signal from input A is amplied, speakers are only connected to

the accordingly labelled output. The volume is controlled via the control knob

for channel A.

Available operating modes

Installation and starting up

Proline 3000