User manual

7 Operation
Connect microphones to the low-impedance XLR inputs (MIC, 3) or the high-impedance 1/4"
inputs (MIC/LINE, 4).
Connect musical instruments to the 1/4" inputs (MIC/LINE, 4).
Connect the speaker boxes via the supplied speaker cables to the [SPEAKER OUT] sockets (19)
on the rear panel of the unit.
Use the RCA sockets [TAPE PLAY] (20) on the rear panel of the unit to connect CD player or tape
devices for additional inputs.
Use the RCA sockets [TAPE REC] (21) on the rear panel of the unit to connect recording devices
or the like.
The unbalanced [MAIN OUT] socket (15) provides the master signal with line level.
The unbalanced [REVERB OUT] socket (14) provides the combined eect signal that is tapped
from the four channels Here you can connect an external eects device, which then takes over
the signal processing instead of the built-in reverb function.
Use the unbalanced [AUX IN] socket (13) for additional inputs, or to lead the processed signal
from an external eects device back into the signal path of the power mixer.
Wiring
Operation
PA 4080 Package
25