User manual
Table Of Contents
8 [HIGH]
Treble control of the 3-band master EQ.
9 Use this mains switch to turn the device on or o.
10 [POWER]
This indicator lights up when the unit is switched on.
11 [TAPE]
Use this control to set the playback volume for the TAPE input signals.
12 [FOOT SW]
Here you can connect a foot switch (not supplied) with a 1/4" phone jack to switch the internal reverb function on or
o.
13 [AUX IN]
This AUX input can be used to feed additional signals. If you route the eect signal from the REVERB OUT (14) into an
external eects device, connect its outlet to the AUX IN to lead the processed signal back into the signal path.
14 [REVERB OUT]
This outlet provides the combined eect signal that is tapped from the channels with the [Reverb] controls.
Connections and operating elements
PA 4080 Package
21