User manual
Table Of Contents
1 [TONE]
Tone control to set the desired sound in the respective channel.
2 [REVERB]
Reverb control to adjust the reverb level in the respective channel.
3 [MIC]
Microphone input (for the respective channel), balanced. Use XLR cables to connect microphones to the MIC inputs.
4 [MIC/LINE]
Microphone - / Line-input (for the respective channel), unbalanced. Use 1/4" cables to connect microphones or line
level signals from musical instruments to the MIC/LINE inputs.
5 [VOLUME]
Volume control to set the desired volume in the respective channel.
6 [LOW]
Bass control of the 3-band master EQ.
7 [MID]
Mids control of the 3-band master EQ.
Connections and operating elements
powermixer
20