700 Series Instruction Manual
CONTENTS CONTENTS ....................................................... 2 1. WELCOME TO YOUR ESSE .......................................... 4 2. QUICK START GUIDE ............................................. 5 3. OPERATING INSTRUCTIONS ........................................ 6 CO ALARM ....................................................... 6 VENTILATION .................................................... 6 FUEL ..................................................
6. CONSUMABLE PARTS ................................................
1. WELCOME TO YOUR ESSE Welcome to the ESSE family. tĞ͛ǀĞ ƉŽƵƌĞĚ Ăůů ŽĨ ŽƵƌ ŬŶŽǁůĞĚŐĞ͕ ĞdžƉĞƌƚŝƐĞ ĂŶĚ ƉĂƐƐŝŽŶ ĨŽƌ ĚĞƐŝŐŶŝŶŐ and manufacturing market leading stoves, dating back to 1854, into producing your ESSE stove.
2.
3. OPERATING INSTRUCTIONS CO ALARM Your installer should have ensured that you have a Carbon Monoxide (CO) alarm fitted, in the same room as your ESSE stove. This is a requirement of the BS EN 50292:2013 standard, and you should make sure that you are familiar with the operation of this essential piece of equipment.
3. OPERATING INSTRUCTIONS For best results, we recommend your wood logs are cut to a length of 300mm, and a diameter / width of 70mm.
3.
3. OPERATING INSTRUCTIONS LIGHTING YOUR ESSE STOVE When your ESSE stove is first lit, it may smoke or give off an odour. This is quite normal, as the materials used within its manufacture are heated up for the first time. These symptoms will stop within a short period, but ensure that the room is well ventilated ĚƵƌŝŶŐ ƚŚŝƐ ͚ƐĞƚƚůŝŶŐ ŝŶ͛ ƉƌŽĐĞƐƐ.
3. OPERATING INSTRUCTIONS We recommend a maximum load of wood logs of 2.1Kg / hour, which when stacked in the firebox, should not sit above the row of Tertiary Air holes, located at the rear of the firebox. The door should only be opened during the initial lighting and refuelling of your ESSE stove. If left open during normal operation, you may experience excessive smoke emitting into your room.
3. OPERATING INSTRUCTIONS THE FIRE GRATE AND RIDDLING Your ESSE stove will be hot during and after use. Always use the supplied Operating Tool and / or Stove Glove to riddle the appliance. The Fire Grate in your ESSE stove is made of two parts ʹ The Grate and the Riddle Plate.
3. OPERATING INSTRUCTIONS CLEANING & MAINTENANCE Your ESSE stove should be inspected frequently, and any required maintenance undertaken. We recommend that your ESSE stove is serviced once a year by a qualified service professional. Repairs or modifications should only be undertaken by ESSE authorised professionals. Only genuine ESSE replacement parts should be used, or your warranty may become invalid.
3. OPERATING INSTRUCTIONS WARRANTY Your ESSE stove has been built to the highest standard using premium materials, and comes with a ƚǁŽ LJĞĂƌ ŵĂŶƵĨĂĐƚƵƌĞƌ͛Ɛ ǁĂƌƌĂŶƚy. Register your ESSE stove, online at www.esse.com/warranty-‐ registration. dŚĞ ĐŽŶĚŝƚŝŽŶƐ ŽĨ LJŽƵƌ ǁĂƌƌĂŶƚLJ ĂƌĞ͙ ػ Does not cover incorrect use or application, as advised within this manual. ػ Must be installed appropriately, by a certified installer.
4. INSTALLATION INSTRUCTIONS 4. INSTALLATION INSTRUCTIONS 5 PLANNING THE INSTALLATION /ƚ ŝƐ ƚŚĞ ŝŶƐƚĂůůĞƌ͛Ɛ responsibility to ensure that when installing the appliance, the requirements of the Health and Safety at Work Act 1974 are met.
4. INSTALLATION INSTRUCTIONS 5 PRODUCT SPECIFICATION ʹ 700 SERIES Key Product Specifications Wood Logs Nominal Heat Output (Kw) 9.6 Weight (Kg) 99.0 Minimum Flue Draft 12 Pa Flue Gas Mass Flow (g/s) 8.
4.
4. INSTALLATION INSTRUCTIONS 5 ESSE 775 CO ALARM Building regulations require that whenever a new or replacement fixed solid fuel or wood / biomass appliance is installed in a dwelling, a carbon monoxide (CO) alarm must be fitted in the same room as the appliance, in accordance with BS EN 50292:2002. Please consult Document J of the Building Regulations for detailed guidance.
4. INSTALLATION INSTRUCTIONS 5 TOP OR REAR FLUE CONNECTION The appliance can be installed with either a top or rear connected 6͟ ĨůƵĞ͘ dŚĞ ƐƚŽǀĞ ĐŽŵĞƐ ƐƵƉƉůŝĞĚ with a top connection, so if a rear connected flue is desired, it must be converted before fitting in place.
4. INSTALLATION INSTRUCTIONS 5 1. 2. Remove the heatshield, and remove the knock out section (as escribed above). Remove the flue plate, from the rear of the stove, by unscrewing the three outer fixing screws (using a 13mm spanner). 3. Open the stove door, and remove the top steel baffle. 4. Remove the two nuts, securing the stove top in place, (using a 13mm spanner), and lift it clear from the stove. 5.
4. INSTALLATION INSTRUCTIONS 5 CLEARANCE DISTANCES (COMBUSTIBLES & NON-‐COMBUSTIBLES) The appliance comes with a rear heatshield, which must be installed, irrespective whether the surrounding materials are combustible or non-‐combustible. Required distances to combustibles, (with the supplied heatshield), can be found in the Product Specification section of this manual.
5. APPLIANCE COMMISSIONING CHECKLIST 5. APPLIANCE COMMISSIONING CHECKLIST 5 Please complete, for the owners records and to support any future warranty claims.
6. CONSUMABLE PARTS 6. CONSUMABLE PARTS 5 Item Part No. Item Part No. 1 700-‐002A 700 Brick LH Side Description 7 700-‐007 Steel Fire Plate Description 2 700-‐003B 700 Brick Rear LH 8 700-‐006 Steel Fire Grate 3 700-‐003A 700 Brick Rear RH 9 700-‐45 Ashpan 4 700-‐002B 700 Brick RH Side 10 ROPE/CUT.
7.
ESSE Engineering Ltd., Long lng, Barnoldswick, Lancashire, BB18 6BJ, UK Tel. Fax. Website 01282 813 235 01282 816 876 www.esse.
