Esse 105 Stove Instruction

4
Welcome to the ESSE family. We’ve poured all of our knowledge, expertise and passion for designing
and manufacturing market leading stoves, dating back to 1854, into producing your ESSE stove. All
ESSE stoves are manufactured at our factory in Barnoldswick, Lancashire, and we’re confident that
if appropriately installed, maintained and cared for, your ESSE stove will provide you with many years
of room heating, comfort and joy.
Before you fire up your ESSE stove for the first time, ensure that your installer has installed the stove
in line with the ‘Installation’ section of this manual, and that the flue and chimney has been swept.
The stove is not suitable for use in a shared flue.
As you would expect, when in use, all parts of the stove become hot, so always use the supplied
operating tool or glove when interacting with your ESSE stove. A fireguard manufactured in
accordance with BS 8423:2002 should be used, if it is likely that children or pets may come into
contact with the appliance. The stove is suitable for intermittent operation. Do not use an aerosol
spray close to the stove when alight.
These instructions provide all the necessary information to both install, then operate your ESSE
stove. The key information relating to your stove, including the serial number, can be found on the
data plate, located at the rear of the stove. Simply swing the data plate up to access the information.
Please quote the model and serial number, in any future communication with your retailer or the
manufacturer.
Data plate location
1. WELCOME TO YOUR ESSE