Esse 105 Stove Instruction

17
3. OPERATING INSTRUCTIONS
flow of air, preventing a build-up of moisture inside your ESSE stove, which can lead to rusting.
Before re-lighting the appliance, remove the top baffle bricks, to remove any debris, and check for
blockages within the flue.
WARRANTY
Your ESSE stove has been built to the highest standard using premium materials, and comes with a
two year manufacturer’s warranty. Register your ESSE stove, by either completing and returning
the supplied Warranty Registration Card, or by registering online at www.esse.com/warranty-
registration, and receive an warranty upgrade to five years.
The conditions of your warranty are…
✘
Does not cover incorrect use or application, as advised within this manual.
✘
Must be installed appropriately, by a certified installer.
✘
Does not cover consumable parts, including fire grate, glass window, rope door seals,
ashpan, vermiculite fire bricks, catalytic combustor or particle filter.
✘
Does not cover general wear and tear or cosmetic damage unrelated to the function of
the appliance.
TROUBLESHOOTING
Problem
Cause
Solution
Window glass
blackening
• Wet wood logs
• Use wood logs with 15-20%
moisture content
• Fuel touching glass window
• Use a poker to move fuel back
within the fire grate
• Too little combustion air
• Increase the setting of the air
control
Fumes emit into
room
• Blocked flue
• Check and remove any blockage
• Catalytic Combustor may need
replacing
• Remove and inspect Catalytic
Combustor
Fire will not light
• Too little combustion air
• Increase the setting of the air
control
• Wet wood logs
• Use wood logs with 15-20%
moisture content
• Flue draft is too low
• Consult with your installer, to
rectify
Fire burns too quickly
• Too much combustion air
• Reduce the setting of the air
control