Esse 105 Stove Instruction

12
3. OPERATING INSTRUCTIONS
Removal and replacement of the Catalytic Combustor and Particle Filter
1. Remove the Bypass Boss from the shaft by
unscrewing it anticlockwise.
2. Remove the top, side then rear fire bricks.
3. Slide the chamber containing the Catalytic
Combustor and Particle Filter fully to the left, before
carefully allowing it to swing down free.
4. Remove the Catalytic Combustor and then the
Particle Filter from the cartridge, for cleaning or
replacement, retaining the sealing rope.
5. Once the two parts have been cleaned or
replaced, reassemble the cartridge, reinstalling it
along with the chamber into the stove, and slide
into position.
6. Reinstall the bypass boss, tightening up clockwise.
Finally, replace the firebricks.