User Manual

parts list & assembly instructions
IMPORTANT NOTES:
PARTS INCLUDED:
STOP! Before returning this item to the store, please contact us directly with any questions or concerns: [e-mail]
C2
E2
G2
Placing one hand under the tier slot, and pressing down the support can help with assembly. *
The use of a rubber mallet and gentle tapping may be necessary in order to fully connect the pieces to ensure a sturdy display.
By replacing the C support pieces with the optional base pieces
C2 , or the E with E2 , etc., you can use your tower at different sizes.
After each use, it is recommended to wipe down all surfaces with a soft, damp cloth as soon as possible. Dry the pieces before storing.
Pieces should have a snug fit to ensure a sturdy display throughout the life of your tower. Pieces are expected to compress slightly which
will make assembly easier with use.
•
•
•
•
•
5 tier square cupcake & treat tower
Assemble two support pieces (A) to form an “X”.
Place the ”X” support (A) on top of the tier (B),
lining up (A) tabs with the slots in the tier (B).
Gently press down on the (A) support until tabs
are secured into tier slots (B). Then, ip over
base.
Assemble two support pieces (E). Gently press
down on the (E) support until tabs are secured
into tier slots (D).
Assemble two support pieces (G). Gently press
down on the (G) support until tabs are secured
into tier slots (F).
Assemble two support pieces (I). Gently press
down on the (I) support until tabs are secured
into tier slots (H).
Place tier (D) on top of support (C), lining up
slots (D) with tabs (C). Gently press down on
tier (D) until secured into slots.
Next, place tier (F) on top of support (E), lining
up slots (F) with tabs (E). Gently press down on
tier (F) until secured into slots.
Next, place tier (J) on top of support (I), lining
up slots (J) with tabs (I). Gently press down on
tier (J) until secured into slots.
Next, place tier (H) on top of support (G), lining
up tabs (G) with slots (H). Gently press down
on tier (H) until secured into slots.
Place the large tier (B) on a at surface
YOU DID IT!
Get Inspired! Visit our gallery for design ideas:
www.thesmartbaker.com/gallery
Assemble two support pieces (C). Place hand
under tier slot, gently press down on the (C)
support until tabs are secured into tier slots (B).*
1. 2. 3.
4. 5. 6.
7. 8. 9.
10. 11. 12.