Specification

SPP-2400
The Solar PaQ
Solar Power PaQ 2400
UPC: 861150002623
A Midnight Solar Combiner Box
PV Combiner-MNPV6
(For 150 VDC charge controllers and 600 VDC grid-tie inverters)
Gray aluminum type 3R rainproof enclosure with insulating dead front.
Includes 3 30 Amp Breakers
6- 150VDC breakers or
4-600/1000VDC fuse holders.
Includes:
15 position PV negative bus bar,
14 position ground bus bar
120 amp Plus bus bar for breakers and 80 amp bus bar for fuses.
Punch out tabs on the plastic dead front make for a clean
installation using circuit breakers.
Up to three 300VDC breakers from 7 to 50 amps may be installed as a disconnect (no combining busbar).
The enclosure may be mounted to a pole or wall indoors or out.
The plus bus bar may be split to support two grid tie inverters or two charge controllers.
Grid-tie inverters typically can have PV minuses common.
Most charge controllers can have PV minuses common (Exception XW and BlueSky).
Boxed size: 9 x 14 x 4 weight: 4 Lbs.
ETL Listed for US & Canada
PV Source Circuits PV Output Circuits
Model
Max VDC
Max # of
Input Circ.
Max
OCPD
Rating
Amps
Amps
OCPD
Wire
Range
AWG
Max # of
Output
Circ.
Max Cont.
Current
Amps
Wire
Range
AWG
Approved
Mounting
Orientation
Enclosure
Type/
Material
Listing
MNPV6 (LV) 150 6 20 CB 150V 14-6 1 120 14-1/0 90 to 140 3R/Alum UL1741
MNPV6 (HV) 600 4 20 FUSE 14-6 2 80 14-1/0 90 to 140 3R/ Alum UL1741
NOTE: All of the connections have a 90 deg C rating except the 2/0 positive lug that carries a 70 deg C rating. Midnight can supply 1/0
lugs to substitute in these cases where 90 deg C is required.