Specification

SPP-2400
The Solar PaQ
Solar Power PaQ 2400
UPC: 861150002623
SolaDeck Model - 0786-3R5
Outdoor Pass Through Enclosure Asphalt/Cedar Roof Systems For AC or DC current.
This roof mounted unit provides safe and secure wiring
to join several Solar panels to combine and pass securely
into the building.
UL50 Type 3R Enclosures
ETL Listed and labeled to UL standards- Report # 3125796
CRT-001b Revised March 2012
UL50 Type 3R, 11 Edition Electrical equipment enclosures
CSA C22.2 # 94-M91 special purpose enclosures (2006)
Basic specifications
 Material - 18 Gauge G 90 Steel Base/Cover
 Process - Seamless draw (stamped)
 Flashing- 15” x 15”
 Height - 2.625”
 Cavity- 8” x 9” x 2.5” (162 Cubic inches)
 Finish- Powder coat (1100 hours salt spray)
Assembly:
 Cavity Base and cover punched for matched assembly
 Base Flashing pre-punched for roof deck mounting
 Cavity Base - (5) predetermined dimples for fittings or
conduit
BusBars Provided
Base plate:
 16 gauge galvanized steel
 Fastened to base flashing with toggle fastening system
 Finish – Powder coat (1100 hours salt spray)
 (5) Roof deck knockouts
 Knockout sizes – (3).5”, (1).75” and (1)1”
 Rail - 7” slotted 35mm
Ground – Installed with steel stud and star nut
(5) Position for wire size 14 – 6
Strain Relief Clip – Aluminum riveted installation
Hardware pack:
7 - 1” Truss head screws
4 - .5” 8-32 thread cutting screws
4 - Bonded seal washers #10
2 – 10-32 ½” Steel studs
2 – 10-32 3/8” steel star nuts
1 – Foam gasket seal
1 – Installation instructions