Owners manual

220V Installation
I       
, please call HOME & GARDEN SPAS Technical
Assistance prior to starting installation at [phone]. Factory
trained technical service specialists are available to answer questions during their
normal business hours Monday through Friday from 8:30 am to 5 PM est.
Correct wiring of the electrical service box, GFCI box and pack terminal block
is required. Spas installed for 220v operation require a 4-wire, 50 amp or 60 amp
(depending on the spa model), 220 volt subfeed in non metallic pipe to the spa
equipment compartment.
US and Canadian GFCI Wiring Diagram
e black and red wires from the
electrical box must be connected
to the input of the GFCI.
e white wire from the
electrical box must be connected
to the neutral bus.
e green or copper wire must
be connected to the ground lug of
the GFCI.
e black, red and white
wires going to the spa must be
connected directly to the output
of the GFCI.
e neutral to the GFCI must be
connected to the neutral bus.
e green or copper wire going
to the spa must be connected to
the ground lug.
Electrical Information
Main Service
Panel
Spa GFCI Panel
must be accessible but
at least 5 feet (1.5m)
from the spa.
16