Installation Guide

5
1
1
Care and Cleaning the Galley Tap Finishes
Replacement Parts
The Galley Tap is made of solid stainless steel. This finish has NO PROTECTIVE COATING on it. Stainless steel is by its material
nature very tarnish-resistant, but by no means tarnish or stain proof. This finish will react to it’s environment over time. Cleaners that
contain bleach may cause rust. Keep your Galley Tap wiped clean and dry, and use only a cleaner specifically made for stainless steel.
Trapped moisture on the surface of your finish can lead to staining. Astringent cleaners, chlorine, bleach, and acidic-based organic
cleansers are potentially harmful to stainless steel finishes.
It is the responsibility of the customer to check for any material finish defects BEFORE installation.
1. Do not allow water spots to dry on the fixture. Keep the surface clean and dry after use.
2. Periodic cleaning can be done by applying a stainless steel cleaner with a soft, clean cloth to gently remove surface spots and
brighten the finish. For PVD finishes, clean with a soft, warm, damp cloth.
3. Never use cleaners with bleach, abrasives or vinegar. Never use any type of abrasive cleaning pad.
ABOUT OUR FINISHES:
IMPORTANT NOTICE:
SUGGESTED FINISH MAINTENANCE PROCEDURE:
1. Hand Spray
2. Aerator & Ring
3. Aerator Key
4. O-Ring Gasket
5. Acetal Ring
6. Acetal Ring
7. Set screw
8. Cartridge
9. Cartridge Nut
10. Dome Cap
11. Handle
12. Set screw
13. O-Ring Gasket
14. Base Ring
15. O-Ring Gasket
16. Mounting Washer
17. Mounting Nut
18. Mounting Nut Screws
19. Gasket
20. Counterweight
21. Adhesive Strips
22. Check Valves
23. Hand Spray Hose
24. Centering Ring
* XXX Represents Finish ** From July 2017
X.1051-XXX *
A.363
S.203
O.052 **
S.292 **
S.293 **
A.128
S.232
B.709
B.710-XXX*
F.017-XXX*
A.356
O.066 **
B.711-XXX *
O.022
A.358
F.016
A.357
A.064
S.252
S.273
A.290
A.354
X29.1083
19
20
21
23
22
7
5
13
11
6
4
14
15
16
17
18
12
10
3
2
1
24
9
8