Installation Guide

In Stock Workstations / WashStations
™
with DryDock
™
4
Side view applies to all
DryDock™ Workstations shown
IWS 4S + DD18 IWA 4S + DD18
IWS 4S + DD12 IWA 4S + DD12
IWS 3S + DD18 IWA 3S + DD18
IWS 3S + DD12 IWA 3S + DD12
18” Finished cutout
1/2” Reveal front
and back
10”
16”
SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE
(Recommendations are based on installing 3 or more Tap accessories)
Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)
Galley Deck Switch 1 3/8" min hole diameter or Galley Automatic Strainer Basket knob 1" min and 1 3/8" max hole diameter
Galley Hot and Cold Water Dispenser 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)
Galley Soap Dispenser 1" min hole diameter
Center hole diameters 2" behind cutout
Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap
1
2
2
3
1
2
3 4
Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories