Installation Guide

IWS 30S / IWA 30S

Single Bowl Workstations

IWS 4S / IWA 4S

Side view applies to all

Single Bowl Workstations

IWS 5S

IWS 6S

IWS 7S

Note: For installation where the drain is on the left side, simply reverse placements of Tap and Tap Accessories

18” Finished cutout

1/2” Reveal front

and back

10”

16”

IWS 2C* / IWA 2C* / IBS 2C*

SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE

(Recommendations are based on installing 3 or more Tap accessories)

Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)

Galley Deck Switch 1 3/8" min hole diameter or Galley Automatic Strainer Basket knob 1" min and 1 3/8" max hole diameter

Galley Hot and Cold Water Dispenser 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)

Galley Soap Dispenser 1" min hole diameter

Center hole diameters 2" behind cutout

Note: Galley Hot and Cold Water dispenser requires a minimum 8" clearance center to center if installed to the right of the Galley Tap

*IWS 2C SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE

Galley Deck Switch 1 3/8" min hole diameter or Galley Soap Dispenser 1" min hole diameter

Galley Hot and Cold Water Dispenser 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut)

1 2

IWS 3S / IWA 3S

3 4