Installation Guide Ideal Workstations®, Work&WashStations™, Workstations/WashStations™ with DryDock™, BarStations® and WashStations™
Single Bowl Workstations 18” Finished cutout 10” IWS 7S 1/2” Reveal front and back 16” IWS 4S / IWA 4S IWS 5S IWS 6S IWS 3S / IWA 3S IWS 30S / IWA 30S IWS 2C* / IWA 2C* / IBS 2C* Side view applies to all Single Bowl Workstations SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE (Recommendations are based on installing 3 or more Tap accessories) Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut) 1 Galley Deck Switch 1 3/8" min hole diameter or Galley Auto
Double Bowl Workstations / Work&WashStations™ 18” Finished cutout 10” 16” SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE (Recommendations are based on installing 3 or more Tap accessories) Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut) 2 5 Galley Soap Dispenser 1" min hole diameter 1 3 Galley Deck Switch 1 3/8" min hole diameter or Galley Automatic Strainer Basket knob 1" min and 1 3/8" max hole diameter 4 Galley Hot and Cold Water Dispenser 1 3/8" min ho
BarStations® and WashStations™ IWA 4D / IWS 4D / IWW 4D 18” Finished cutout 1/2” Reveal front and back 10” 16” IWA 30S / IWS 30S IWA 2C* / IWS 2C* / IBS 2C* IWA 3S / IWS 3S IBS 2C* / IWA 2C* / IWS 2C* IBS 18C IWA 4S / IWS 4S Side view applies to all BarStations and WashStations SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE (Recommendations are based on installing 3 or more Tap accessories) Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut) 1 Galley D
In Stock Workstations / WashStations™ with DryDock™ 18” Finished cutout 10” 16” IWS 4S + DD18 IWA 4S + DD18 1/2” Reveal front and back IWS 3S + DD12 IWA 3S + DD12 IWS 3S + DD18 IWA 3S + DD18 IWS 4S + DD12 IWA 4S + DD12 Side view applies to all DryDock™ Workstations shown SUGGESTED GALLEY TAP AND TAP ACCESSORIES PLACEMENT GUIDE (Recommendations are based on installing 3 or more Tap accessories) Galley Tap 1 3/8" min hole diameter (1 1/2" min hole diameter for fast water jet cut) 1 Galley Deck Switc
IMPORTANT 1. Please note: Unlike typical undermount kitchen sink installations, The Galley is installed in the cabinet prior to the counter being templated. A support structure, (wood frame cleat system), will need to be constructed and mounted inside the base cabinet(s) and recessed 1/16" from the top of the cabinet(s). 2. The Workstation and Tap require a minimum of 22 1/2” inside the cabinet. For 24” deep inset cabinets installed against a wall the cabinet must be pulled 1” away from the wall. 3.
1. CONSTRUCT SUPPORT STRUCTURE a) A wood support frame (cleat system) will need to be built and installed into the cabinet(s). This frame will support the weight of The Galley. NOTE: Clips are NOT to be used. b) Construct the support frame so that the inside dimensions of the frame are 1/2" larger than the basin’s inside dimensions. Please refer to pages 1-4 for your Galley dimensions. 1” x 6” HARDWOOD BOARDS ARE RECOMMENDED EXCEPT FOR GALLEY + DRYDOCK, FOR WHICH 1” X 2” ARE RECOMMENDED.
YOU ARE NOW READY FOR THE COUNTERTOP FABRICATOR Countertop Installation Use the white template tray affixed to The Galley flanges as your guide for the front to back cutout. Refer to pages 1-4 for your overall cut-out dimensions or refer to the drawing on the template tray. Note: The front to back cutout dimension must be exactly 18”. 1.
The Galley Workstation Limited Lifetime Warranty 1. GALLEY WORKSTATION LIMITED LIFETIME WARRANTY - Seller provides a Limited Lifetime Warranty. Seller warrants its stainless steel sink, installed in a residential application, to be free from manufacturing defects in materials and workmanship under normal residential usage. This Limited Lifetime Warranty is subject to the warranty conditions and limitations as set forth below. 2.
