Installation Guide

Before You Begin Installation

Package Contents

Tools

1. Observe all local plumbing codes.

2. Turn off water supply.

3. Inspect water supplies for signs of damage. Replace if necessary.

4. DO NOT use petroleum-based products on this faucet.

INSTALLATION WARNING: NEVER USE TEFLON TAPE FOR OUT-OF-THE-WALL THREADED CONNECTIONS. USE

PROVIDED RUBBER GASKETS ONLY. NOT COMPLYING WITH THIS INSTRUCTION COULD DAMAGE THE PRODUCT

AND GENERATE LEAKAGE.

#2 & #3 PHILLIPS SCREWDRIVERS ADJUSTABLE WRENCH ADJUSTABLE PLIERS

Remove all contents from the package and

identify before installation.

1 - Aerator Key

2 - Faucet

3 - Optional Base Ring

4 - Stainless Steel Mounting Washer

5- Stainless Steel Mounting Nut with Two

Crosshead Screws

6- Counterweight with two rubber strips

Note: All Hoses come pre-installed into Faucet and

are water tested at the factory.

Recommended Pressure Range: 20PSI -

75PSI

Maximum Flow Rate: l.8GPM / 6.8L /min

Maximum Temperature: 150° F

Product is Certiﬁed to NSF/ ANSI 372 and conforms with

the lead content requirements for “lead free” plumbing as

e deﬁned by California, Vermont, Maryland, and Louisiana

state laws and the U.S. Safe Drinking Water Act. This

faucet complies with ASME 112.18.1-2018/CSA B125.1-2018

requirements.

TECHNICAL INFORMATION