Instructions / Assembly

First– Measure the opening of your dryer vent. It
should be 4 inches.
Second– Remove the dryer vent cover from the
frame by unscrewing the two screws.
Three– Slide the pipe into your dry vent and push it
flat to the wall.
Four- Using wood screws (if the side of your home is
wood) or masonry tapcon screws (if the side of your
home is brick or masonry). Drill or screw through the
holes of frame. Tighten the screws snug to the frame.
Five– Reinstall the dryer vent cover to the frame.