User Manual

User documentation The Confetti Maker FX Ⓡ
TCM FX-Control
The TCM FX-Control is designed to control multiple TCM products.
Connect the power socket to Powercon cable to the blue connector on the side of the FX
Control.
Connect the E-shot to the FX-Control with the loop through cable. Connect the blue side
of the cable to the E-shot and the grey side of the cable to the back side of the FX Control.
When firing the E-shot first switch the key switch to unlock the panel.
Switch the safety switch to the right so the white dot is pointing upwards. When the red fire button is pushed, the
E-shot will activate. Turn the safety switch to the left when the E-Shot is not in use.
To connect multiple FX Control panels use the loop through cable. Connect the Blue side of the Powercon to the
second FX-Control. Connect the grey side of the loop through cable to the grey connector on the FX-Control.
Both FX-Controllers are now powered.
Ground plate
The TCM FX ground plate is designed to secure the E-shot to the ground. The heavy ground plate ensures that
the E-Shot won’t tip when shooting a confetti tube.