User Manual

User documentation The Confetti Maker FX Ⓡ
Accessories
Loop Through Cable
The function of the loop through cable is supplying multiple devices with a single power socket. Looping through
the device should only be done without power. The first E-shot is connected to a power socket with the power
socket to Powercon cable. The second E-Shot is powered with the blue Powercon connector on the loop through
cable. The grey side of the loop through cable connects to the grey connector on the first E-Shot. Connect the
Powercon by plugging the Powercon into the connector on the E-shot and turning it clockwise until you hear a
click sound. Repeat this process for the rest of the E-Shots.
Power Socket to Powercon cable
The power socket to Powercon cable is the power cable of the E-shot. The power socket side connects to 230V 50-
60HZ. The power connector connects to the E-Shot. Connect the Powercon by plugging the Powercon into the E-
Shot and turning it clockwise until you hear a click sound.