User documentation The Confetti Maker FXⓇ TCMFX E-Shot Article Product Code Version Date : TCMFX E-Shot : TCM356 : 1.
User documentation The Confetti Maker FXⓇ Foreword Thank you for purchasing the TCMFX E-Shot. The Confetti Maker is manufacturer of biodegradable, colorfast and fireproof confetti products and special effects. The products we manufacture are used for various events, such as concerts, opening ceremonies, sporting events and theater show productions. With our products your party is guaranteed to be a great success. “We create experiences” This manual describes the TCMFX E-Shot.
User documentation The Confetti Maker FXⓇ General Safety WARNING! Read the manual carefully before using the TCMFX E-Shot. The Confetti Maker ® is not liable for injury, damage and / or excessive wear resulting from improper maintenance, improper use or modifications to the device. If you have any questions, issues or problems that do not get discussed in this guide, please tell your supervisor or call/e-mail the technical support from The Confetti Maker®.
User documentation The Confetti Maker FXⓇ Specifications Input Weight Size Cylinder Base Plate Voltage Power : Powercon Connection : 2Kg : 80 x 50 x 130mm (L x B x H) : 135mm Ø54mm : 110 x 125 mm (L x B) : 230V AC 50/60Hz : 100W Confetti Tubes Electric Confetti Cannons 40cm: Reach 6m Electric Confetti Cannons 80cm: Reach 12m Electric Streamer Cannons 40cm: Reach 10m Electric Streamer Cannons 80cm: Reach 20m
User documentation The Confetti Maker FXⓇ Ideal environmental values Temperature : 0 – 45 ◦c Humidity : max. 75% Keep away from: - Dust - Corrosive gasses - High concentrations of organic gasses.
User documentation The Confetti Maker FXⓇ Accessories Loop Through Cable The function of the loop through cable is supplying multiple devices with a single power socket. Looping through the device should only be done without power. The first E-shot is connected to a power socket with the power socket to Powercon cable. The second E-Shot is powered with the blue Powercon connector on the loop through cable. The grey side of the loop through cable connects to the grey connector on the first E-Shot.
User documentation The Confetti Maker FXⓇ TCM FX-Control The TCM FX-Control is designed to control multiple TCM products. Connect the power socket to Powercon cable to the blue connector on the side of the FX Control. Connect the E-shot to the FX-Control with the loop through cable. Connect the blue side of the cable to the E-shot and the grey side of the cable to the back side of the FX Control. When firing the E-shot first switch the key switch to unlock the panel.
User documentation The Confetti Maker FXⓇ Components 1. Rotary knob to tighten the Confetti tube 2. Connector 3. Powercon In 4. Powercon Out 5. Rotary knob to adjust the angle. 6.
User documentation The Confetti Maker FXⓇ Preparation Unpack the E-Shot and make sure the device is undamaged. If the device is damaged Please contact your supplier as soon as possible. Use of the E-Shot 1. Place the confetti tube into the holder. 2. Tighten the confetti tube with the rotary knob. 3. Connect the female connector to the from the confetti tube to the male connector in the E-Shot. 4. Connect a Powercon cable to the E-Shot. 5. Power the E-shot to activate the confetti tube.
User documentation The Confetti Maker FXⓇ Warranty The E-Shot has a 3 year warranty which will be void if the E-Shot is handled differently than described in this manual. The warranty is void when the E-shot has been opened by anyone other than the Confetti Maker. The Confetti maker is not responsible for any paint or hardware damaged as a result of rough handling. CAUTION! Always contact your supplier in case of malfunctions. Never try to repair the E-shot yourself.
