Installation Manual

PAT 6,979,108
Please Read All Instructions Carefully
Before Beginning Installation
R-56
INSTALLATION INSTRUCTIONS
CONVERT ALL OF THESE
RECESSED CAN LIGHT PRODUCTS
*MODELS NOT APPLICABLE FOR FAN SUPPORT
RISK OF ELECTRICAL SHOCK.
Disconnect the power to the
existing luminaire at the breaker box. The luminaire's wiring, ballasts or
other electrical parts may be damaged when drilling for installation of the
reflector kit hardware. Check for damage to the enclosed wiring and com-
ponents. Do not alter, relocate or remove wiring, lamp holders, ballasts or
any other electrical components. Install this kit only in luminaires that have
the construction features and dimensions shown in the photographs and /or
d
drawings. To prevent wire damage, do not expose wiring to the sheet metal
of the can or other sharp objects. The Can Converter is not intended for
installation on listed recessed incandescent luminaires installed on an
inclined ceiling. Mount only on listed new construction cans with bar
hangers. DO NOT install on T-bar suspended ceilings. This product is
intended for luminaires with 50 lb. ratings or less. It is not intended for lumi-
naires greater than 50 lbs. It is not intended for ceiling fans with load ratings
of greater than 35 lbs. The reflector kit requires knowledge of lighting lumi-
naire's electrical systems. If not qualified, do not attempt installation.
Contact a qualified electrician
WARNING
This product is designed to work with cans
that utilize incandescent bulbs.
SELF-TAPPING SHEET
METAL SCREWS
FLAT-HEAD SCREWS
AND WING NUTS
#10 NUTS
REDUCER
BUSHING
THREADED PIPE
AND BRASS NUTS
MOUNTING
PLATE
MOUNTING BRACKET AND
OFFSET-SLIDING-BRACKETS
with GROUND WIRE
POWER-OUTLET-
ADAPTER WITH
POWER LEADS
BLACK
WIRE
HOT
WHITE WIRE
NEUTRAL
WHITE BEVELED AND
FLAT MEDALLION
R-56 CAN CONVERTER KIT CONTENTS
Safety Goggles
Power Drill
Wire Cutters
Phillips and Slotted
Screwdrivers
Marker
TOOLS YOU WILL NEED
www.TheCanConverter.com
RECESSED
CAN LIGHT
CONVERSION
KIT

Summary of content (7 pages)