TA18 active subwoofer user manual
Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 email: info@thomann.de Internet: www.thomann.de 30.11.
Table of contents Table of contents 1 General notes............................................................................................................................................... 4 2 Safety instructions..................................................................................................................................... 7 3 Operating elements...............................................................................................................................
General notes 1 General notes This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products are subject to a process of continuous development. We therefore reserve the right to make changes without notice.
General notes Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a possible dangerous situation that can result in minor injury if it is not avoided.
General notes Warning signs Type of danger Warning – high-voltage. Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended to be used in a sound reinforcement system. Use the device only as described in this user manual. Any other use or use under other operating conditions is consid‐ ered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire.
Safety instructions CAUTION! Possible hearing damage The device can produce volume levels that may cause temporary or permanent hearing impairment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance or use suffi‐ cient ear protectors. NOTICE! Risk of fire Do not block areas of ventilation.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker.
Operating elements 3 Operating elements 1 Volume Volume control for the input. Increase the volume by rotating clockwise and decrease the volume by rotating counter-clockwise. First please adjust the volume to minimum before switching the unit on or making connections. Then adjust the appropriate volume. 2 ACTIVE This LED lights up when the unit is switched on. 3 INPUT sockets Connect the stereo line input signals for channels L & R to these balanced mounting plugs. 4 115 V / 230 V Mains voltage selector.
Operating elements 5 ON / OFF Power ON/OFF switch. 6 INV Phase inversion switch. 7 HIGH CUT Turn this control to adjust the frequency of the high cut filter between 80 Hz and 250 Hz. 8 LIMIT This LED lights up when the limiter circuit becomes active. 9 OUTPUT sockets L/R line outputs for the connection of active mid/high speakers.
Operating elements 10 Mains fuse If this fuse blows, you first have to disconnect the device from the mains. Then replace the broken fuse by a new one with same specifications. 11 Mains power supply connector Make sure that the voltage selector (4) is in the position that matches with the actual supply voltage available for operation, BEFORE you connect the mains power here.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Establish all connections as long as the unit is switched off. Use the shortest possible highquality cables for all connections. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain.
Installation CAUTION! Risk of injury due to heavy weight Due to the heavy weight of the device, at least two persons are required for trans‐ port and installation. NOTICE! Possible property damage by magnetic fields Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field.
Installation 4.1 Pin assignment You can use XLR connectors with either balanced or unbalanced wiring. XLR connection for signal in and outputs XLR mounting sockets are provided for signal inputs. XLR mounting plugs are provided for signal outputs. Drawings and descriptions explain the pin assignment.
Installation Unbalanced wiring: 1 Ground, shielding 2 Signal 3 Bridged with Pin 1 TA18 17
Technical specifications 5 Technical specifications Mains voltage 115 V~/60 Hz, 230 V~/50 Hz System Active subwoofer Cabinet colour Black Driver 1 × 18" (woofer) Frequency response 35 Hz - 250 Hz (-3 dB) Max SPL (1m) 133 dB (free field) Output power 500 W Distortion <2% Input impedance Balanced: 20 kΩ, unbalanced: 10 kΩ Connectors XLR input / output Dimensions (W x D x H) 693 × 530 × 580 mm Packing dimensions (W x D x H) 793 × 680 × 630 mm active subwoofer 18
Technical specifications Net weight 45 kg / pc. Gross weight 50 kg / pc.
Cleaning and care 6 Cleaning and care Cleaning plastic housing Do not use aggressive cleaners. Wipe the casing only with a slightly damp cloth.
Protecting the environment 7 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose these materials with your normal household waste, but make sure that they are fed to a recovery. Please follow the notes and markings on the packaging.
Notes active subwoofer 22
Musikhaus Thomann e.K. · Treppendorf 30 · 96138 Burgebrach · Germany · www.thomann.
