User manual

1 [MODE]
Slide switch to select the operating mode of the integrated sound processor: [T10a], [T12a], [T15a]. Thus, the sound
characteristic is adjusted to the satellite speaker used (midrange and tweeter).
The yellow LEDs indicate the selected mode.
Before you change the mode, please turn off the unit. This will avoid damages.
2 LED [PWR] (blue): Indicates that operating voltage is present.
LED [SIG] (green): Indicates that the input signal is present.
LED [CLIP] (rot). Indicates overload (clipping). In this case, the level of the line input signal is too high.
3 [VOLUME]
Volume control.
4 [LINE IN A]
Balanced line signal input, designed as XLR / 1/4" combo socket.
5 [LINE OUT A]
Line signal output, designed as XLR chassis plug.
Connections and operating elements
active subwoofer
16