User manual

7 IEC chassis plug with fuse holder for the power supply.
Defective fuses must always be replaced by fuses of the same type.
8 [115V/60Hz — 230V/50Hz]
Selector switch for the power supply. Make sure that, before activating the device, the switch position is set to the
local supply voltage.
9 [LINE/MIC]
Push-button to select the input sensitivity of the speaker (line or microphone level). Push the push-button with a
suitable sharp tool, e.g. a ballpen.
10 LED [LINE]
The LED lights in operation when the input sensitivity is set to LINE.
11 LED [MIC]
The LED lights in operation when the input sensitivity is set to MIC.
Connections and operating elements
active 2-way-full-range-speaker
20