User manual
Table Of Contents
10 [LINE/MIC]
Button to select the input sensitivity of the speaker (line or microphone level).
LED [MIC]
The LED lights in operation when the input sensitivity is set to MIC.
LED [LINE]
The LED lights in operation when the input sensitivity is set to LINE.
11 [120Hz]
Low cut switch to lower frequencies below 120 Hz. This function reduces impact noise and maximize the lifetime of
the woofer.
12 [CLIP]
Indicates overload. If the LED flickers or is lit, the input signal level is too high.
Connections and operating elements
active 2 wayfull-range-loudspeaker
18