User manual

8 [115V/60Hz — 230V/50Hz]
Selector switch for the power supply. Make sure that, before activating the device, the switch position is set to the
local supply voltage.
9 [STANDBY]
Pushbutton to enable or disable the power saving mode.
If the speaker box is in power save mode and receives no signal for 60 minutes, it switches to standby mode. As soon
as the unit receives a signal, it switches automatically back to normal mode.
LED [ACTIVE]
Power indicator. This LED lights up continuously in normal operation and turns off when the box – on activated
power save mode – switches to standby mode.
LED [STANDBY]
Standby operation. This LED lights up when the box – on activated power save mode – switches to Standby mode
and turns off when the box is switched back to normal operation.
Connections and operating elements
PA 108 A
17