User manual

1 Microphone head grill to prevent damage and to reduce wind and breath noise.

2 Lower housing part. Unscrew to open.

3 [BATT]

This LED shows the state of the batteries. When the UHF handheld transmitter is turned on and the capacity of the

battery is sucient, the LED lights green. When the batteries are exhausted, the LED lights red.

4 [ON/OFF]

Slide switch to turn the UHF handheld transmitter on and o.

5 Infrared sensor for receiving the channel setting from the device to the UHF handheld transmitter. The sensor is

accessible after removal of the lower housing part. After each change, transfer the channel setting from the device to

the UHF handheld transmitter. Place the UHF handheld transmitter as close as possible to the device and then press

[ASC]. The LED [RF ] LED lights up when the transmission was successful.

6 Battery compartment for 2 AA cells or appropriate rechargeable batteries.

Connections and operating elements

battery-powered speaker