User manual

1 XLR chassis plug LINK
This outlet can be used to feed the signal to further active speakers.
2 XLR / phone combo socket LINE IN
Line level input for balanced or unbalanced signals.
3 Ground/Lift button
If a ground loop is causing hum you can use this switch to cut the connection between the earth pin of the device
and the signal ground in the device.
4 IEC chassis connector for operating voltage supply.
5 Fuse holder.
6 Slide switch LINE VOLTAGE
This switch is used to adapt the device to the local supply voltage.
115: AC 105…120 V
230: AC 210…240 V (factory default setting)
Connections and operating elements
Mon A10, A12, A15
15