User manual

6 DSP functions
Press [MASTER | PUSH FOR DSP] once during operation to call up the unit's DSP function ‘Sound
Programme’ . ‘MODE / LOCATION’ appears in the display. Press again [MASTER | PUSH FOR DSP]
to enable the function ‘MODE’ . Turn the knob to select one of the sound programmes ‘BAND’ ,
‘GUITAR’ , ‘VOCAL’ or ‘DRUMS’ and press [MASTER | PUSH FOR DSP] to conrm the selection.
Turn [MASTER | PUSH FOR DSP] to enable the function ‘LOCATION’ . Press
[MASTER | PUSH FOR DSP] to conrm the selection. Turn the knob to select one of the EQ set‐
tings ‘MONITOR’ (monitor) or ‘STAND’ (stand) and press [MASTER | PUSH FOR DSP] to conrm
the selection.
Press [MASTER | PUSH FOR DSP] twice during operation to call up the unit's DSP function ‘3-
Band EQ’ . ‘HIGH EQ’ (treble control) appears in the display. Press again
[MASTER | PUSH FOR DSP] to enable this function. Or turn the knob to select another EQ func‐
tion ‘MID EQ’ (mid control) or ‘LOW EQ’ (bass control) and press [MASTER | PUSH FOR DSP] to
call it up. Then turn the knob clockwise to raise the level of the selected frequency band by up
to 12 dB. Or turn the knob counterclockwise to lower the level of the selected frequency band
by up to 12 dB.
Sound programmes
3-band EQ
DSP functions
DSX 110 M, DSX 112 M, DSX 115 M
23