User manual

1 [Balanced Outputs]
Balanced line signal outputs, designed as XLR chassis plug.
2 [Balanced Inputs]
Balanced line signal inputs, designed as XLR chassis socket.
3 [Phase]
If necessary, this switch shifts the phase of the subwoofer signal by 180 °. This avoids unwanted cancellation eects in
combination with other speakers.
4 [Subwoofer Level]
Volume control.
5 [Xover]
Crossover frequency switch Toggles between 90 Hz and 120 Hz.
6 [Outputs Mode]
This switch is used when using active speaker boxes. In [Link] position, all signals from 20 Hz to 20 kHz are output to
the speaker boxes. If the switch is in [Xover] position, only signals above 90 Hz/120 Hz are output to the speaker
boxes.
Connections and controls
DSP 18 Sub
17