User manual

18 [Line in]
XLR / 1/4" combo socket as additional Line in to feed in a monitor mix e. g.
19 [Auto Power o]
When this switch is in the [Enable] position, the device will turn o after approx. 30 minutes without input signal. To
turn it then back on again, switch the [Power] button o and on again.
20 [Power]
Switches the device on and o.
21 IEC chassis plug with fuse holder for the power supply. To replace the fuse, carefully take out the fuse holder with a
small screwdriver, replace the defective fuse with a new one of the same type and push the fuse holder back in until
it snaps into place.
22 Housing recess for the included tripod peg, which has previously been screwed onto a tripod, allows the device to be
placed in three dierent vertical angles.
23 [Direct out]
The signal from the [Line in] input is looped through this XLR chassis plug, e. g. to be sent to other devices.
Connections and operating elements
CX 5
19