User manual

15 [On | Signal | Limit | Protect]
The [On] LED lights when the device is turned on.
The [Signal] LED lights up when a signal is present at at least one input and that input's gain or volume controller is
turned up suciently far to reproduce the signals.
The [Limit] LED lights up when the circuit to limit the overall signal is activated. This is to protect the device against
overload. In this case, reduce the overall volume.
The [Protect] LED lights up when the internal protection circuit intervenes and prevents further operation. Then turn
the device o and wait a minute before you turn it back on again.
16 Speaker.
17 3/8" thread for mounting a microphone.
Connections and operating elements
CX 5
17