User manual

1 Connection for the supply voltage
IEC chassis plug for power supply with fuse holder
2 [POWER ON/OFF]
Use this switch (power switch) to turn the unit on and o.
3 [DISABLE/ENABLE]
Slide switch to enable or disable the power saving mode.
If the speaker box is in power save mode and receives no signal for 60 minutes, it switches to standby mode. As soon
as the unit receives a signal, it switches automatically back to normal mode.
4 [VOLUME]
Volume control
5 [STANDBY]
Standby operation. This LED lights up when the box – on activated power save mode – switches to Standby mode
and turns o when the box is switched back to normal operation.
[PEAK]
Indicates overload. If the LED ickers or is lit, the input signal level is too high.
Connections and operating elements
active speaker
16