User manual

7 Preset button
This button has two functions:
n If kept pressed while turning the device on, the ID assignment is made. The internal digital signal processor (DSP)
assigns a new ID to the device for the remote control within the Pronet network. Each device must have a unique
ID so that it can be represented in the Pronet network. If you assign a new ID, all devices with already assigned
IDs must be turned on and connected to the Pronet network.
n If the device is already on, pressing the button selects the DSP preset. The selected preset is indicated by the
corresponding LED.
– [STANDARD]
This setting is suitable for vertically own line arrays, which consist of four to eight devices, or for the middle
area of a larger own array. It can also be used for stacked arrays.
– [LONG THROW]
This setting can be used in arrays with more than six or eight devices and be loaded in the top or the top two
devices in order to achieve a more balanced distribution of sound pressure, especially when these devices
are aimed at distant targets or the upper galleries of a large house.
– [DOWN FILL / SINGLE BOX]
This setting, which provides a much smoother frequency response can be loaded in the lower (usually one or
two) devices of a large own array to achieve a pleasant sound for the audience near the stage. This setting is
also very useful if the device is used alone at the front on very large stages.
– [USER]
Connections and controls
line array element
26