User manual
Table Of Contents
1 Fold-out latch
2 Clearance bores.
Fix the bolt in the hole for the desired angle.
3 Use this hole to x the latch in the zero position.
1 Bores for locking pin, front side
2 Thread (M10) for attaching standard screw feet for stack mounting
3 Clearance bores
4 Bores for locking pin, rear side
5 Numbering of the clearance bores
6 16 mm shackle, optionally available as accessory (item number 323399)
Flying frame (optional)
Installation
line array element
20