User manual

3. Press the [TERMINATE] button on the rear panel of the last unit.
4. Turn on the rst device while keeping its [PRESET] button pressed on the rear panel.
5. Leave the rst device turned on and repeat step 4 for all other devices until the last
device is turned on.
When a new device is to be added, only step 4 must be repeated. Each device keeps its ID,
even if it is turned o, as it is stored in the internal memory of the device. The ID is only deleted
or reassigned by explicit allocation as described above. Find more detailed information and
instructions in the User Manual supplied with the Pronet software.
Networking and remote control
line array element
34