User manual

3. Position the vertical latch of the ight frame in the U-rail of the top unit.
4. Secure the latch in the correct position with a safety pin at the U-rail.
5. For ying operation, mount a shackle on the ying frame. It must be located directly
above the centre of gravity of the entire system. In the gure, the centre of gravity is
marked by ‘C’, the arrow shows the correct position of the U-shackle for this installation
situation.
The ying frame can also be used as a framework for positioning of a device on the oor. In
this case, turn the unit by 180° upside down and attach it to the ying frame, as described in
chapter Installation of a own system. Then turn the whole thing around and put the ying
frame with the rubber feet on the ground.
Assembly of a device for posi‐
tioning
Installation
line array element
22