User manual

1 Vertical latch of the overlying unit (in longitudinal and lateral view).
2 Securing bore in the vertical latch. Use this bore when the vertical latch of the device is not folded down, so for single
installation or for the lowest unit in a system.
3 Bore for angular steps of 1 °.
4 Bore for angular steps of 0.5°.
5 U-rail of the device (side view).
6 Clearance bores for odd-numbered angles.
7 Clearance bores for even-numbered angles.
8 Use this bore of the U-rail when the vertical latch of the device is not folded down, so for single installation or for the
lowest unit in a system.
Installation
A 10 LA
19