User manual

4.1 Installation
Due to its mechanical structure, the device can either be individually put on the ground or
hung, or arranged to line arrays of variable size. The units can be joined together using the
built-in fasteners without any additional parts. For easy, exible and secure mounting, the
ying frame (item number 313502) is available as optional accessories. This section shows how
easy the assembly is.
To the left and right of the front panel, a safety pin is attached, allowing you to stably connect
the unit to the one directly above it. There is a fold-out vertical latch on the rear panel. This
latch ts into the U-rail of the device mounted below, which has a series of numbered bores.
Attach the latch of the upper unit to the U-rail of the underlying device with a safety pin. By
selecting the hole, you can set the desired angle of inclination. Figure and table show the
mechanical parts on the rear side and its function.
Overview
Connecting the devices to each
other
Installation
A 10 LA
17