Instructions

Congratulations on your purchase of a Basement Watchdog battery!
 Clean any corrosion off of the ring posts
and ring connectors on the ends of the
battery wires
 Use a stiff brush or sandpaper
 DO NOT apply corrosion resisting
sprays or pads to the terminal rings or
posts after you have cleaned them,
since this could prevent the battery
from charging properly
Please note: The yellow cap comes with the Basement Watchdog
System. If you have any questions, concerns or need a free replacement
for the yellow battery cap please call Glentronics, Inc. at 800-991-0466,
option 3 or email us at [e-mail].
 Included with the Basement Watchdog
system is a yellow battery cap
 This yellow cap is to be placed on the
second cell from the positive post
 When checking fluid levels, rinse the
yellow cap under running water
Page 1
2nd Cell
Fill Line
1 Check fluid levels every 4-6 months 2 Clean the underside of yellow cap 3 Clean the battery terminals
To help prolong the life of the battery, please follow the following steps:
Also see the instruction manual for further details and important safety precautions.
 When fluid levels are low, add distilled
water to the top fill line
 DO NOT add more acid after the initial
installation date
Receive a reminder to check
fluid levels every 6 months by:
Liking us on Facebook
Basement Watchdog
Following us on Twitter
@WatchdogPumps
or
UPDATED 6/25/14