Operating instructions

Installation of the hands-free car kit

4. Positioning and mounting

Step 1:

First of all, please choose the most convenient position for the monitor

and the holder in your vehicle by attaching the monitor / hook-and-loop

fastener to the pad and checking different positions in the vehicle.

After having found a suitable position for the monitor in the vehicle you

can mount / attach the holder accordingly. Please use a cleaning cloth

for degreasing the surfaces you want to attach the holder to.

The end of the cable with the small Molex plug is ideally suited for pla-

cing through small openings in the dashboard area. This facilitates a

practically invisible installation of the cable. Take the length of the cable

into account and make sure that it is of sufficient length to reach the

intended location of the electronics box.

Important:

When positioning the monitor please take care that the X

monitor does not impair the view onto the road, that it will

not be installed in the impact zone of the passenger com-

partment (amongst others in the airbag inflation zones) and

that cables may be laid without any problems.

The holder can be affixed just once, removing could X

damage the adhesive area. In case of high variations in

temperatures - depending on the structure and the

features - decolourisations of the surfaces can occur during

the subsequent utilization.

Please avoid direct sunlight on the monitor or high inter- X

nal temperatures, which can be rapidly reached in parked

vehicles. In such cases, remove the monitor of the hands-

free car kit from the cradle and put it in the car glove pocket

or glove box for instance.