Operating instructions

Installation of the hands-free car kit

to enable the reproduction of music via your radio.

3 - Voice output of the hands-free car kit

Version 1, with integrated loudspeaker switch box:

The cable provided serves the purpose of transferring the voice output

to one of the loudspeakers in the car. In the best case scenario, this

speaker should be on the passenger side of the vehicle in order to pro-

vide sufficient distance from the microphone and to prevent possible

echoes from occurring. The jack plug remains unused during the use of

the internal loudspeaker switch box.

Version 2, with external loudspeaker switch box:

Refer to separate chapter:

Installation of the audio switch box AC 5120

4 - Microphone input

This is where you plug in the microphone jack. After connection 3 has

already been occupied use the rider. This ensures that neither of the

jacks is able to loosen as a result of vibrations.

5 - Monitor jack

Please plug the 9 pole plug of the monitor connection cable into this

jack. Tighten at least one of the two fixing screws hand-tight so that

this plug cannot become unplugged as a result of vibrations.