Data Sheet

PART
2
Actual
size
150-degree connector
A
A
A
A
How to launch and
test the gliders
After you have built a model, follow
these instructions to fly it.
Here’s how:
1
Inspect the model. Look at
the model head on. Make sure
all components are securely
assembled, nothing is twisting,
and the two sides are perfectly
symmetrical.
2
Take the model to an open space
with a 10-meter-long “test flying”
area. Grass or smooth flooring
is preferable to keep your model
safest upon landing.
3
Hold the model by the middle
fuselage dowel. Throw it forward
with a smooth flick of the wrist.
A
If the model flies straight
forward on the first try, you don’t
need to adjust it.
B
If the model
flies up and then falls down, it is
too light in the front: move the
main wing toward the tail.
C
If the model flies downward too
fast, it is too heavy in the front:
move the wing toward the nose.
4
Make adjustments until you get it
to fly nicely!
A
B
C
The tail should not
be bent.
The wings should
not be twisted, loose,
or uneven.
Adjust the tail angle.
Adjust the
location of
the main wing
along the body.
TAKING IT
TO THE SKIES
1
2
3
Fasten your seat
belts and stow your
tray tables... we
are cleared for
take
-
off!
5